E-Weld 3

Welding separating agent for steel and stainless steel or laser cutting

E-WELD 3 is a welding separating agent with integrated cleaning- and degreasing effect. It can be used in the welding of stainless steel and other metals. In addition, it protects metal sheets in laser cutting. Contaminated components can be cleaned prior to the welding process.

Non-flammable
Solvent- and silicone-free
Galvanizing and varnishing after welding is possible without any problems
No labelling required under the CLP Regulation

Kategooria:

Kirjeldus

ENGLISH

E-WELD 3
The odourless water-based welding protection spray with cleaning- and degreasing effect can be used in all common welding operations, from MIG/MAG welding to laser cutting. The emulsion is easy to apply and, in dry and wet state, prevents weld spatter from adhering to surfaces. It also protects work pieces, welding nozzles and welding equipment in the process.

Contaminations such as shavings, machining oils, light corrosion protection oils or cooling liquids of sawing systems can be cleaned easily and effectively with E-WELD 3 prior to welding. The clean surface can then be welded immediately.

The ingredients contained therein form a barrier between the work piece and the spatter, and provide all weldable materials with temporary corrosion protection. Directly after the welding process, the metal sheets can be galvanized or varnished without any problems.

It is particularly suited for laser cutting as it prevents the development of skimmings at the laser penetration point so that soot can be removed more easily, and the cut edges do not have to be reworked.

EESTI

E-WELD 3
Lõhnavaba veepõhine keevituskaitse pihusti koos puhastus- ja rasvatustamistakistusega saab kasutada kõikides tavalistes keevitusoperatsioonides, alates MIG / MAG-i keevitamisest kuni laserlõikamiseni. Emulsiooni on kergesti rakendatav ja kuivas ja niiskes olekus takistab keevispragude pindade külge kinni. Samuti kaitseb see protsessi tööosakeste, keevituspihuste ja keevitusseadmete eest.

Enne keevitamist saab E-WELD-3 abil hõlpsalt ja tõhusalt puhastada saastumist, nagu näiteks laastud, töötlemisõlid, kerged korrosioonikaitseõlid või saagimisseadmete jahutusvedelikud. Seejärel saab puhast pinda koheselt keevitada.

Selles sisalduvad koostisosad moodustavad töökeha ja pritsme vahelisi takistusi ning pakuvad kõigile keevitatavatele materjalidele ajutise korrosioonikaitse. Pärast keevitusprotsessi saab metall-lehti ilma igasuguste probleemideta galvaniseerida või lakkida.

See sobib eriti laserlõikamiseks, kuna see takistab laseri läbitungimispunktis olevate lõhede arendamist nii, et tahma saab kergemini eemaldada ning lõigatud servi pole vaja uuesti töödelda.